Psc PowerScanTM RF Manual do Utilizador

PowerScan™ RFHandheld Bar Code ScannerUser’s Guide

User’s Guide 7Using the PowerScan RF SystemThis section covers the following topics:• Battery Charging and Maintenance•How

8PowerScan™ RF ScannerRapid flashing indicates that charging is taking place. Rapid charging occurs when the battery temperature is between 10°C (50°F

User’s Guide 9Four Station ChargerIf you have a Four Station Charger, batteries are inserted for charging as shown in Figur

10PowerScan™ RF ScannerHow to ScanFigure 6 illustrates some tips to help get the best scanning results:1. The scanner must be pointed at a slight angl

User’s Guide 11Depth of FieldThere are currently four different range models for the scanner. Depending upon the model type

12PowerScan™ RF ScannerFigure 8. Depth of Field (HD)NOTESee the section titled, Definition of a "mil" for moreinformation about reading this

User’s Guide 13Figure 9. Depth of Field (LR)NOTESee the section titled, Definition of a "mil" for moreinformation

14PowerScan™ RF ScannerFigure 10. Depth of Field (XLR)NOTESee the section titled, Definition of a "mil" for moreinformation about reading th

User’s Guide 15LED and Beeper IndicationsThe Base Station LED indicators and the scanner’s LEDs and beeper are used to anno

16PowerScan™ RF ScannerTable 2. Scanner YELLOW LED FunctionsTable 3. Scanner BEEPER FunctionsLED INDICATIONDURATION COMMENTLaser on indicationOn Stead

PSC Scanning, Inc.959 Terry StreetEugene, Oregon 97402Telephone: (541) 683-5700Telefax: (541) 345-7140PSC, the PSC logo, Quadralogic II and PowerScan

User’s Guide 17Table 4. Base Station LED FunctionsTransmis-sion Error BeepHigh, then low, then high, then low.Indicates uns

18PowerScan™ RF ScannerCharge(Battery)Continuous flashingWhen a scanner is nested in the station, this indicates its bat-tery is being quick charged.L

User’s Guide 19Active SymbologiesThe active (enabled) bar code symbologies in the standard factory defaults are:• Code 39 (

20PowerScan™ RF ScannerFigure 11. Scanner Labeling and Nomenclature 1. Trigger 4. Tether Hook2. Scan Window 5. Yellow LED3. Green LED 6. BatteryNOTEFi

User’s Guide 21Laser CautionsThe PowerScan RF bar code scanner is certified in the U.S. to conform to the requirements of D

22PowerScan™ RF ScannerRadio Frequency InterferenceThis device complies with Part 15 of the FCC Rules. Operation is sub-ject to the following two cond

User’s Guide 23MaintenanceThe scan window will require occasional cleaning to remove smudges, dust and other debris. To ens

24PowerScan™ RF ScannerTroubleshootingTroubleshoot your RF scanning system by performing the following checks:For the RF system, ensure that...• the b

User’s Guide 25Sample Bar CodesUse these test bar codes to check the scanner’s ability to read the var-ious symbologies rep

26PowerScan™ RF ScannerUPC-AUPC-A with 2 digit Add-onUPC-A with 5 digit Add-onUPC-EEAN-8EAN-130 00112 23344 0490 60992 01118 7690000 08029 510

User’s Guide iTable of ContentsUnpack and Inspect Your Scanner ... 1References.

User’s Guide 27

DECLARATION OF CONFORMITYPSC hereby declares that the Equipment specified below has been tested and found compliant to the following Directives and St

Asia PacificPSC Hong KongHong KongTelephone: [852]-2-584-6210Fax: [852]-2-521-0291AustraliaPSC Asia Pacific Pty Ltd.North Ryde, AustraliaTelephone: [

User’s Guide 1Unpack and Inspect Your ScannerAfter unpacking your new scanner, check the contents of the ship-ping carton t

2PowerScan™ RF ScannerInstalling the BatteryOrient the battery as shown in Figure 1, then push it into the scanner until it snaps in place. To remove

User’s Guide 3Verifying Scanner OperationOnce a charged battery has been installed in the scanner, scan the sample bar code

4PowerScan™ RF Scanner2. Consult your Host Terminal manual to determine the required communication parameters for the Host Terminal (e.g., baud rate,

User’s Guide 55. Apply power to the Host Terminal.6. Verify communication with the Host Terminal by aiming the linked scann

6PowerScan™ RF ScannerVerifying Scanner-to-Base Station CommunicationsPoint the linked scanner at a sample bar code from the back pages of this manual