
Getting Started
Quick Reference Guide 7
Linking the Scanner to a Bluetooth Device
A scanner can optionally be linked to a PC with a Bluetooth radio
installed.
1. Ensure that the Bluetooth device and its driver are installed on the
PC.
2. On the PC, open the control window for the Bluetooth device
(usually called “My Bluetooth Places”). Follow the instructions for
the Bluetooth device to disable the security setting for the Blue-
tooth serial port.
3. Scan the “
Link to a PC” bar code below.
4. On the PC, search for Bluetooth devices that are in range and
select the “Datalogic PS7000 Scanner.”
5. Connect with the serial port for the Datalogic PS7000 Scanner.
Note which serial port number is assigned to the scanner.
6. Open your serial port application and connect to the scanner using
the serial port that was assigned in the previous step.
Battery Pack Charging and Maintenance
Seat the scanner (with installed Battery Pack) in a powered Base Station
as shown in
Figure 5, ensuring the Battery Pack is fully seated and
engages the station’s metal contacts. The scanner will sound a short
“chirp” when good contact is made and the green LED on the Base Sta-
tion should flash, indicating the battery is charging. Alternatively, multi-
ple Battery Packs can be charged external to the scanner using an
accessory charging unit available from your Datalogic dealer.
NOTE
The Amber LED will blink twice when a bar code is
decoded when the battery is getting low.
Link to a PC
Comentários a estes Manuais