PSC Scanners Especificações Página 374
- Página / 440
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
6-266 Magellan
®
8100/8200 Scanner
Standard 2 of 5 Minimum Label Length
This feature specifies the minimum allowable length of an Standard 2 of 5
label.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET STANDARD 2 OF 5 MINIMUM LABEL
LENGTH below. You’ll need to cover any unused bar codes on this
and the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired minimum label length. The selectable range for
this option is 01 to 50, even numbers only. Pad all single digit num-
bers with a leading zero to yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET STANDARD 2 OF 5 MINIMUM LABEL LENGTH
NOTE
Length in this case includes check and data characters, but does not
include start or stop characters. This feature applies when Standard
2 of 5 Length Control is set to variable-length decoding.
Minimum label length should be less than or equal to maximum label
length.
- Magellan 1
- 8100/8200 1
- Product Reference Guide 1
- Disclaimer 2
- TABLE OF CONTENTS 3
- Product Reference Guide iii 5
- Product Reference Guide v 7
- Product Reference Guide vii 9
- 8100/8200 Scanner 10
- Product Reference Guide ix 11
- Product Reference Guide xi 13
- Section 1 15
- Manual Overview 16
- How to Use This Manual 17
- 1-4 Magellan 18
- Interlock 19
- Connection 19
- Physical Parameters 20
- Warm-Up Time 21
- 1-8 Magellan 22
- Electrical Specifications 23
- Laser and Product Safety 24
- Labeling 26
- Bar Codes Supported 28
- Section 2 29
- 2-2 Magellan 30
- Checkstand Design 31
- Scanner Installation 32
- Scanner Maintenance 32
- Ergonomic References 32
- Scanner Usage 32
- Site Preparation Overview 33
- 2-6 Magellan 34
- Ventilation and Spacing 35
- Service Access 36
- Power Installation 37
- Checkstand Preparation 38
- Counter Cutout 39
- 2-12 Magellan 40
- Flush — Correct 41
- Above Flush — Incorrect 41
- Below Flush — Incorrect 41
- 2-14 Magellan 42
- 18.0 lb 43
- (8.16kg) 43
- 13.2 lb 43
- (6.00kg) 43
- 2-16 Magellan 44
- Installation Overview 45
- 2-18 Magellan 46
- Operational Verification 47
- 2-20 Magellan 48
- Diagnostic Modes 49
- 2-22 Magellan 50
- Cables & Connections 50
- Figure 2-11. Cable Routing 51
- 2-24 Magellan 52
- Lighting Considerations 52
- Viewing Angle 53
- 2-26 Magellan 54
- 1.5" 55
- 1.0" 55
- 2-28 Magellan 56
- Set-Up & Installation 57
- (Obstruction) 59
- 2-32 Magellan 60
- System Power-Up Recap 61
- 2-34 Magellan 62
- Section 3 63
- 3-2 Magellan 64
- Proper Weighing Technique 65
- Operational Controls 66
- Operational Modes 66
- Error Reporting 67
- Operational Configuration 67
- . lb 67
- 3-6 Magellan 68
- Operating Mode 68
- Additional Functions 69
- 3-8 Magellan 70
- Scale Adjustments 70
- Operational Maintenance 72
- 3-12 Magellan 74
- Slide WRG 76
- Window Out 76
- Retainer 76
- Section 4 77
- Diagnostic Procedures 78
- Error Codes 79
- 4-4 Magellan 80
- 7-Segment Display 81
- Scale Error Reporting 82
- Product Reference Guide 4-7 83
- Flowcharts 84
- Product Reference Guide 4-9 85
- 4-10 Magellan 86
- Product Reference Guide 4-11 87
- 4-12 Magellan 88
- Product Reference Guide 4-13 89
- 4-14 Magellan 90
- Section 5 91
- 5-2 Magellan 92
- Motion Test 93
- Automatic Zero Setting Test 93
- 5-4 Magellan 94
- 5-6 Magellan 96
- Calibration 97
- Debris Chutes 97
- 5-8 Magellan 98
- Shift Test 99
- 5-10 Magellan 100
- Blanking Test 101
- 5-12 Magellan 102
- Decreasing-Load Test 102
- Return to Zero Test 102
- 5-14 Magellan 104
- Shift Test (Metric) 104
- 5-16 Magellan 106
- 5-18 Magellan 108
- Section 6 109
- 6-2 Magellan 110
- Programming Overview 111
- 6-4 Magellan 112
- What Is Programming Mode? 112
- Programming Session 113
- 6-6 Magellan 114
- Programming Sequence 115
- 6-8 Magellan 116
- LED and Beeper Indicators 117
- If You Make a Mistake 117
- 6-10 Magellan 118
- Test Mode 118
- Double Read Timeout 119
- 6-12 Magellan 120
- Laser Timeout 121
- 6-14 Magellan 122
- Laser Timeout — continued 122
- Motor Timeout 123
- 6-16 Magellan 124
- Motor Timeout — continued 124
- 6-18 Magellan 126
- Green LED Idle State 126
- Scanner Button Options 127
- 6-20 Magellan 128
- Power-up Beep Control 129
- 6-22 Magellan 130
- Good Read Beep Control 131
- 6-24 Magellan 132
- Good Read Beep Frequency 132
- Product Reference Guide 6-25 133
- 6-26 Magellan 134
- Good Read Beep Length 134
- Good Read Beep Volume 135
- 6-28 Magellan 136
- Product Reference Guide 6-29 137
- 6-30 Magellan 138
- Good Read When to Indicate 138
- Product Reference Guide 6-31 139
- 6-32 Magellan 140
- Scale Enable 140
- Scale Country Mode 141
- 6-34 Magellan 142
- Scale Enforced Zero Return 143
- 6-36 Magellan 144
- Scale Interface Type 145
- 6-38 Magellan 146
- Scale Motion Level Filter 147
- 6-40 Magellan 148
- Scale LED Enable 149
- 6-42 Magellan 150
- EAS Active State 151
- 6-44 Magellan 152
- EAS Timeout 152
- Aux Port Mode 153
- 6-46 Magellan 154
- Aux Port Mode — continued 154
- Interface Related Features 156
- Interface Type — continued 157
- 6-50 Magellan 158
- Product Reference Guide 6-51 159
- 6-52 Magellan 160
- Product Reference Guide 6-53 161
- 6-54 Magellan 162
- 6-56 Magellan 164
- Global Prefix 165
- 6-58 Magellan 166
- Global Prefix — continued 166
- Global Suffix 167
- 6-60 Magellan 168
- Global Suffix — continued 168
- IBM Features 169
- 6-62 Magellan 170
- IBM Scale Address 170
- IBM Scale Address — continued 171
- 6-64 Magellan 172
- IBM USB Interface Options 173
- 6-66 Magellan 174
- IBM USB Scanner Device Type 175
- RS-232 Features 176
- RS-232 Baud Rate — continued 177
- 6-70 Magellan 178
- 6-72 Magellan 180
- RS-232 Number of Data Bits 180
- RS-232 Number of Stop Bits 181
- 6-74 Magellan 182
- RS-232 Parity 182
- RS-232 Parity — continued 183
- 6-76 Magellan 184
- RS-232 Hardware Control 184
- Product Reference Guide 6-77 185
- 6-78 Magellan 186
- RS-232 Intercharacter Delay 186
- RS-232 Software Flow Control 187
- 6-80 Magellan 188
- RS-232 Host Echo 188
- 6-82 Magellan 190
- RS-232 Ignore Host Commands 190
- RS-232 TTL 191
- 6-84 Magellan 192
- RS-232 TTL Invert 192
- RS-232 Beep on ASCII BEL 193
- 6-86 Magellan 194
- RS-232 Beep After Weigh 194
- RS-232 Beep on Not on File 195
- 6-88 Magellan 196
- RS-232 ACK NAK Enable 196
- Product Reference Guide 6-89 197
- 6-90 Magellan 198
- RS-232 ACK Character 198
- RS-232 NAK Character 199
- 6-92 Magellan 200
- RS-232 ACK NAK Timeout Value 201
- 6-94 Magellan 202
- RS-232 ACK NAK Retry Count 202
- RS-232 ACK NAK Error Handling 203
- 6-96 Magellan 204
- RS-232 Label ID Control 205
- 6-98 Magellan 206
- Single Cable RS-232 Options 207
- 6-100 Magellan 208
- RTS CTS SELECTION = OPTION 0 209
- RTS CTS SELECTION = OPTION 1 209
- 6-102 Magellan 210
- RTS CTS SELECTION = OPTION 4 211
- RTS CTS SELECTION = OPTION 5 211
- 6-104 Magellan 212
- Single Cable RS-232 Use BCC 212
- 6-106 Magellan 214
- Single Cable RS-232 Use STX 214
- 6-108 Magellan 216
- Single Cable RS-232 Use ETX 216
- 6-110 Magellan 218
- Symbology Programming 219
- UPC-A Enable 219
- 6-112 Magellan 220
- 6-114 Magellan 222
- Expand UPC-A to EAN-13 222
- UPC/EAN AIM ID 223
- 6-116 Magellan 224
- UPC-A Label ID 224
- 6-118 Magellan 226
- UPC-E Enable 228
- 6-122 Magellan 230
- Expand UPC-E to UPC-A 231
- 6-124 Magellan 232
- Expand UPC-E to EAN-13 232
- UPC-E Label ID 233
- 6-126 Magellan 234
- 6-128 Magellan 236
- EAN-13 Enable 237
- 6-130 Magellan 238
- 6-132 Magellan 240
- EAN-13 ISBN Conversion Enable 240
- EAN 13 Label ID 241
- 6-134 Magellan 242
- 6-136 Magellan 244
- Bookland AIM ID 245
- 6-138 Magellan 246
- Bookland Label ID 246
- EAN-8 Enable 247
- 6-140 Magellan 248
- Expand EAN-8 to EAN-13 249
- 6-142 Magellan 250
- EAN 8 Label ID 250
- 6-144 Magellan 252
- 6-146 Magellan 254
- EAN-8 Decoding Levels 254
- 6-148 Magellan 256
- Other UPC/EAN Options 257
- 6-150 Magellan 258
- UPC/EAN Reconstruction 258
- Price Weight Check 259
- 6-152 Magellan 260
- 6-154 Magellan 262
- Enable EAN Two Label 262
- ADDONS = DISABLE 263
- 6-156 Magellan 264
- Addons — continued 264
- 6-158 Magellan 266
- GTIN Enable 268
- GTIN Label ID 269
- 6-162 Magellan 270
- 6-164 Magellan 272
- RSS-14 Enable 273
- 6-166 Magellan 274
- RSS-14/EAN-128 Emulation 275
- 6-168 Magellan 276
- RSS-14 2D Component Enable 276
- RSS-14 AIM ID 277
- 6-170 Magellan 278
- RSS-14 Label ID 278
- RSS Expanded Enable 279
- 6-172 Magellan 280
- 6-174 Magellan 282
- RSS Expanded AIM ID 282
- RSS Expanded Label ID 283
- 6-176 Magellan 284
- RSS Expanded Length Control 284
- 6-178 Magellan 286
- RSS Expanded Fixed Length 1 287
- 6-180 Magellan 288
- RSS Expanded Fixed Length 2 288
- Code 39 Enable 289
- 6-182 Magellan 290
- 6-184 Magellan 292
- Code 39 Full ASCII 293
- 6-186 Magellan 294
- Code 39 AIM ID 294
- Code 39 Label ID 295
- 6-188 Magellan 296
- Code 39 Length Control 296
- Code 39 Maximum Label Length 297
- 6-190 Magellan 298
- Code 39 Minimum Label Length 298
- Code 39 Fixed Length 1 299
- 6-192 Magellan 300
- Code 39 Fixed Length 2 300
- Code 39 Stitching 301
- Pharmacode 39 Enable 302
- 6-196 Magellan 304
- Pharmacode 39 Label ID 305
- Code 128 Enable 306
- 6-200 Magellan 308
- Convert Code128 to Code 39 308
- Code 128 AIM ID 309
- 6-202 Magellan 310
- Code 128 Label ID 310
- Code 128 Length Control 311
- 6-204 Magellan 312
- Code 128 Maximum Label Length 312
- Code 128 Minimum Label Length 313
- 6-206 Magellan 314
- Code 128 Fixed Length 1 314
- Code 128 Fixed Length 2 315
- 6-208 Magellan 316
- Code 128 Stitching 316
- EAN-128 Enable 317
- 6-210 Magellan 318
- EAN 128 AIM ID 318
- EAN 128 Label ID 319
- 6-212 Magellan 320
- 6-214 Magellan 322
- I 2 of 5 AIM ID 323
- 6-216 Magellan 324
- I 2 of 5 Label ID 324
- I 2 of 5 Length Control 325
- 6-218 Magellan 326
- I 2 of 5 Maximum Label Length 326
- I 2 of 5 Minimum Label Length 327
- 6-220 Magellan 328
- I 2 of 5 Fixed Length 1 328
- I 2 of 5 Fixed Length 2 329
- 6-222 Magellan 330
- I 2 of 5 Stitching 330
- Codabar Enable 331
- 6-224 Magellan 332
- 6-226 Magellan 334
- 6-228 Magellan 336
- 6-230 Magellan 338
- Codabar AIM ID 338
- Codabar Label ID 339
- 6-232 Magellan 340
- Codabar Length Control 340
- Codabar Maximum Label Length 341
- 6-234 Magellan 342
- Codabar Minimum Label Length 342
- Codabar Fixed Length 1 343
- 6-236 Magellan 344
- Codabar Fixed Length 2 344
- Codabar Stitching 345
- Code 93 Enable 346
- Code 93 AIM ID 347
- 6-240 Magellan 348
- Code 93 Label ID 348
- Code 93 Length Control 349
- 6-242 Magellan 350
- Code 93 Maximum Label Length 350
- Code 93 Minimum Label Length 351
- 6-244 Magellan 352
- Code 93 Fixed Length 1 352
- Code 93 Fixed Length 2 353
- 6-246 Magellan 354
- Code 93 Stitching 354
- MSI/Plessey Enable 355
- 6-248 Magellan 356
- 6-250 Magellan 358
- MSI/Plessey AIM ID 359
- 6-252 Magellan 360
- MSI/Plessey Label ID 360
- MSI/Plessey Length Control 361
- 6-254 Magellan 362
- 6-256 Magellan 364
- MSI/Plessey Fixed Length 1 364
- MSI/Plessey Fixed Length 2 365
- 6-258 Magellan 366
- MSI/Plessey Stitching 366
- Standard 2 of 5 Enable 367
- 6-260 Magellan 368
- 6-262 Magellan 370
- Standard 2 of 5 AIM ID 370
- Standard 2 of 5 Label ID 371
- 6-264 Magellan 372
- 6-266 Magellan 374
- 6-268 Magellan 376
- Standard 2 of 5 Stitching 377
- 6-270 Magellan 378
- Appendix A 379
- A-2 Magellan 380
- Indicator LEDs 380
- Volume/Tone Push Button 381
- A-4 Magellan 382
- Scale Zero Push Button 383
- Calibration Switch 383
- A-6 Magellan 384
- Appendix B 385
- RS-232 Cable Pinout 386
- Connector Hardware 387
- IBM Cable Pinout 388
- IBM USB Cable Pinout 389
- Auxiliary Port 390
- EAS Interlock Connector 391
- Power Cable 392
- Remote Display 392
- Appendix C 393
- C-2 Magellan 394
- C-4 Magellan 396
- C-6 Magellan 398
- C-8 Magellan 400
- Appendix D 401
- D-2 Magellan 402
- Appendix E 403
- E-2 Magellan 404
- Product Reference Guide E-3 405
- E-4 Magellan 406
- Product Reference Guide E-5 407
- E-6 Magellan 408
- Product Reference Guide E-7 409
- E-8 Magellan 410
- Product Reference Guide E-9 411
- E-10 Magellan 412
- Product Reference Guide E-11 413
- E-12 Magellan 414
- Product Reference Guide E-13 415
- E-14 Magellan 416
- Appendix F 417
- F-2 Magellan 418
- F-4 Magellan 420
- F-6 Magellan 422
- Code 39-Pharmacode 423
- I 2 of 5 423
- F-8 Magellan 424
- MSI/Plessey 425
- F-10 Magellan 426
- AIM Formats 426
- 2-Digit Supplemental 427
- 5-Digit Supplemental 427
- F-12 Magellan 428
- F-14 Magellan 430
- Code 128 / EAN128 431
- F-16 Magellan 432
- Product Reference Guide F-17 433
- F-18 Magellan 434
- Product Reference Guide I-1 435
- 2 Magellan 436
- Product Reference Guide I-3 437
- 4 Magellan 438
- ASCII Character Set 439
Manuais e produtos relacionados com Leitores de códigos de barras PSC Scanners
(24 páginas)
Leitores de códigos de barras PSC 26-Key Especificações
(200 páginas)
(200 páginas)
Leitores de códigos de barras PSC DUET Especificações
(400 páginas)
(400 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais