PSC Scanners Guia do Utilizador descarregar pdf (Página 11)

VS800

™ Scanner User's Guide 9

Connecting the Scanner

The VS800 scanner connects to the host POS terminal via an interface

cable. The cable connects to the scanner with a modular connector

and to the host terminal with the connector required by the host

(RS-232, OCIA, Keyboard Wedge, Wand or IBM POS). Figure 5

shows how to connect the scanner to the store host terminal. The

type of DC power connector depends on your existing store host

terminal.

DC power to the scanner is supplied by one of two methods:

1. From the host terminal (Power-Off-Terminal)

through a single cable that carries both data and DC

power.

2. From an optional AC/DC power adapter that

provides DC power, either through the side of the

connector to the POS System, or through a branch in

the Y-cable connection.

Never work on equipment, connect or disconnect signal

cables during periods of lighting activity.

Always power-down (switch off) all equipment prior to

connecting cables.

Power-Off-Terminal (P.O.T.)

1. Connect the interface cable to the scanner.

2. Connect the other end of the interface cable to the

host terminal.

AC/DC power supply (if required)

1. Connect the interface cable to the scanner.

2. Connect the DC barrel plug into the side of the

connector at the POS end of the cable, or into the DC

connector of the power branch of the Y-cable.

3. Connect the interface cable to the host terminal.

4. Plug the AC/DC power adapter into a functional

AC outlet.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Sem comentários

PSC Scanners Guia do Utilizador Página 11