PSC Magellan 8500 Especificações descarregar pdf (Página 52)

100

101

2-22 Magellan

8500Xt Scanner

needing to scan an item’s barcode. Pass an active EAS tag over the

scanner in the same direction you would scan a barcode. The bot-

tom-most LED will flash red, then orange, then return to green.

The

beeper may be configured to sound a high frequency beep to

announce successful deactivation.

Scale. If the Yellow LED is not lit, press the Scale Zero Push Button

momentarily. If the scale is operating correctly, the yellow LED

will illuminate and remain on steady, and the display will show a

reading of 0.00 lb (0.000 kg for metric). If the display is blank or

- 0 -

is displayed, it may be necessary to calibrate the scale

before continuing. Refer to

Chapter 5, Calibration Procedures, Sin-

gle Interval

, for calibration procedures.

Remote Scale Display. Check to verify that 0.00 lb (0.000 kg for met-

ric) is displayed, then place an item on the weighing platter. Ver-

ify that the display shows a weight and that the yellow LED goes

out.

Remove the item and observe that Remote Scale Display

shows 0.00 lb (0.000 kg for metric) and that the yellow LED is

On.

5. Unplug the AC power cord from the outlet and disconnect the

wer cord and Remote Scale Display cable from the scanner’s

connector panel.

After you have verified that the scanner and scale (if present) are com-

pletely functional, continue with the following procedures to complete the

installation.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 479 480

Comentários a estes Manuais

Sem comentários

PSC Magellan 8500 Especificações Página 52

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de códigos de barras PSC Magellan 8500